The brush rake is an all-purpose mulching tool, and its use has exploded in popularity with outdoor enthusiasts.

This handy little tool is available at most hardware stores for just a few bucks, but its popularity has been spreading quickly.

This video tutorial is going to show you how to mulched your trees with it, and the most important part of it is that you will be able to do it without breaking a sweat.

The technique involves taking a small piece of bark off the tree, then pulling it up and into a small plastic bag.

This will be enough to create a large, thin layer of mulch, which you can then use as you wish for your trees.

This is what you need: a small brush rake, a small container, a piece of scrap wood, a plastic bag, and a plastic sheet.

The easiest way to get started is to take a piece the size of your palm and use it as the base for your brush rake.

The brush will pull up from the bottom of the container and create a big, thin, airy, and shiny mulch that you can use as a base for the rest of the brush.

Next, you’ll need to add a little bit of water, as that will give you a more solid mulch.

Then, you can pull up the bark from the tree and push it down the container with your finger.

This process will cause the bark to split into smaller pieces, and as it does, you will create a thick, air-tight layer of thin mulch to keep the tree dry.

Once you’ve created a thick layer of thick mulch on the tree you can start to add in more bark, and then add in the rest.

When you’re done adding in more wood, add in some branches to give the tree a bit more strength.

When the tree has some wood added, add it in too.

The final step is to finish the job by letting the mulch dry in the sun for about 20 minutes, before placing it in the ground.

You’ll see the mulched tree standing up on the edge of the bag with a nice, shiny mulched bark underneath it.

To see how easy this is to do, try using the brush at home.

For more DIY mulching tips, check out these other articles: